Knick Stratos Pro A401B CONDI, User Manual

Page: 12 / 160

12
Safety Information
Be sure to read and observe the following safety instructions!
The device has been manufactured using state of the art technology
and it complies with applicable safety regulations.
When operating the device, certain conditions may nevertheless lead
to danger for the operator or damage to the device.
See also separate “Safety Instructions“ document.
CAUTION!
Note:
Before commissioning you must prove that the device may be
connected with other equipment.
Commissioning must only be performed by trained personnel autho-
rized by the operating company! Whenever it is likely that protection
has been impaired, the device shall be made inoperative and secured
against unintended operation.
The protection is likely to be impaired if, for example:
• the device shows visible damage
• the device fails to perform the intended measurements
• after prolonged storage at temperatures below –30 °C or above
70 °C
• after severe transport stresses
Before recommissioning the device, a professional routine test must
be performed. This test must be carried out at the manufacturer’s
factory.