Knick Stratos Pro A401B CONDI, User Manual

Page: 111 / 160

111
Measurement
Display Remark
or AM/PM and °F:
From the configuration or calibration menus,
you can switch the device to measuring
mode by pressing the meas key.
In the measuring mode the main display
shows the configured process variable (Cond
or temperature), the secondary display
shows the time and the second configured
process variable (Cond or temperature). The
[meas] mode indicator lights and the active
parameter set (A/B) is indicated. A/B is not
displayed with parameter set “Fix A”.
Pressing the enter key briefly shows the output currents.
By pressing the meas key you can step through the following dis-
plays. When no key has been pressed for 60 sec, the device returns to
the standard display.
1) Selecting the parameter set
(if set to “manual“ in the configuration).
Select the desired parameter set using
the

arrow keys (PARSET A or PARSET B
blinks in the lower display line).
Press enter to confirm.
Further displays
(each with meas).
2) Display of tag number (“TAG“)
3) Display of time and date