Knick Stratos Pro A201COND, User Manual

Page: 11 / 144

11
I input
The analog (0) 4 ... 20 mA current input can
be used for external temperature compen‑
sation; see page 72.
Control Inputs (TAN SW-A005)
HOLD
(Floating digital control input)
The HOLD input can be used for external
activation of HOLD mode; see page 37.
CONTROL
(Floating digital control input)
The CONTROL input can be used either for
parameter set selection (A/B) or for flow
monitoring; see page 76.
Signal Outputs
The device provides two current outputs (for transmission of mea‑
sured value and temperature, for example). The output curve is
adjustable (linear, bilinear or logarithmic), see page 62.
Options
Additional functions can be enabled by entering a TAN (p. 107).
Introduction
5
6
13
14
10
11
Current
input
HOLD
input
CONTROL
input