manualshive.com logo in svg

Knick Stratos Pro A201 PH, User Manual

Share
Download
Knick Stratos Pro A201 PH User Manual Download Page 97

97

The sensor type is selected during 

Configuration

. 

The device only switches to measuring mode when the connected 

sensor corresponds to the type configured (Sensoface is friendly):

MEMO SENS

Digital Sensors

Otherwise, an error message is released.  

The 

info

 icon is displayed. You can display 

the error text in the bottom line using the 



keys.

The comprehensive display 

options of the software 

allow drawing conclusions 

on the aging behavior of 

the sensors at one glance 

and making a reliable 

forecast for predictive 

 maintenance.

The software is available 

as “Basic“ (calibration 

 function)  or  “Advanced“ 

(with sensor database) 

 version: 

www.knick.de

Calibration history of several sensors

History: Load diagrams of the sensors

Memosens Sensors: Configuring the Device 

Summary of Contents for Stratos Pro A201 PH

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands