Knick Stratos Pro A201 PH User Manual Download Page 119

Page: 119 / 176

119

Diagnostics

Display

Menu item

Displaying the logbook entries

(TAN SW-A002)

Select LOGBOOK using



, press

enter

to confirm.

Using the



keys, you can scroll backwards and

forwards through the logbook (entries -00-...-99-),

-00- being the last entry.

If the display is set to date/time, you can search for a

particular date using the



keys.

Press



to view the corresponding message text.

If the display is set to the message text, you can

search for a particular message using the



keys.

Press



to display the date and time.

Press

meas

to return to measurement.

Extended logbook / Audit Trail (TAN SW-A003)

Using the



keys, you can scroll backwards and

forwards through the extended logbook (entries

-000-...-199-), -000- being the last entry.

Display: CFR

Audit Trail also records function activations

(CAL CONFIG SERVICE), some Sensoface messages

(cal timer, wear, SIP, CIP) and opening of the

enclosure.

Summary of Contents for Stratos Pro A201 PH

















































































































































































Search results

Summary of Contents for Stratos Pro A201 PH

Reviews:

Brands by name

Popular brands

Knick Stratos Pro A201 PH, User Manual

Search results

Summary of Contents for Stratos Pro A201 PH

Reviews:

Brands by name

Popular brands