115
Measurement
Display
Remark
or AM/PM and °F:
From the configuration or calibration me-
nus, you can switch the device to measuring
mode by pressing the
meas
key.
In the measuring mode the upper display
shows the configured process variable (pH,
ORP [mV], or temperature), the lower dis-
play line shows the time and the second
configured process variable (pH, ORP [mV],
or temperature). The [meas] mode indicator
lights and the active parameter set (A/B) is
indicated.
By pressing the
meas
key you can step through the following dis-
plays. When no key has been pressed for 60 sec, the device returns to
the MAIN DISPLAY.
1) Selecting the parameter set
(if set to “manual“ in the configuration).
Select the desired parameter set using
the
arrow keys (PARSET A or PARSET B
blinks in the lower display line).
Press
enter
to confirm.
Further displays
(each by pressing
meas
).
2) Display of tag number (“TAG“)
3) Display of time and date
Summary of Contents for Stratos Pro A201 PH
Page 174: ...174 Index ...
Page 175: ...175 ...
