Knick Stratos Evo A402, User Manual

Page: 158 / 196

158 Error Messages
Error
Info text
(is displayed in case of fault when the
Info key is pressed)
Problem
Possible causes
ERR 01 NO SENSOR
Sensor error
Device type not assigned
Defective sensor
Sensor not connected
Break in sensor cable
ERR 02 WRONG SENSOR
Wrong sensor
ERR 04 SENSOR FAILURE Failure in sensor
ERR 05 CAL DATA
Error in cal data
ERR 10 CONDUCTANCE TOO HIGH
Device type Cond-Cond: Channel A
Measuring range of
conductance exceeded
ERR 11 RANGE CONDUCTIVITY
Device type Cond-Cond: Channel A
Display range violation
ERR 13 TEMPERATURE RANGE
Device type Cond-Cond: Channel A
Temperature range violation
ERR 15 SENSOCHECK
Device type Cond-Cond: Channel A
Sensor or line error
ERR 40 CONDUCTANCE TOO HIGH
Device type Cond-Cond: Channel B
Measuring range of
conductance exceeded
ERR 41 RANGE CONDUCTIVITY
Device type Cond-Cond: Channel B
Display range violation
ERR 43 TEMPERATURE RANGE
Device type Cond-Cond: Channel B
Temperature range violation
ERR 45 SENSOCHECK
Device type Cond-Cond: Channel B
Sensor or line error