SensoGate WA131M
8
1.5 Safety Accessories
Specially developed accessories are available to increase safety.
ZU0818 Retainer Clamp for Ingold Socket, 25 mm
The retainer clamp prevents the coupling nut of the Ingold socket (25 mm) screw
joint from accidentally loosening.
The wires of the retainer clamp connect SensoGate WA131M to the customer’s
process port. A locking lug on the retainer clamp engages in the groove of the
coupling nut (form-fit).
ZU1055 Retainer Clamp for Process Connec
tion K8
The retainer clamp prevents the coupling nut of the screw joint for a K8 process
connection from unintentionally loosening.
The wires of the retainer clamp connect SensoGate WA131M to the customer’s
process port. A locking lug on the retainer clamp engages in the groove of the
coupling nut (form-fit).
ZU0877 Locking Clamp for Process Connec
tion G1, G1 ¼, R1, R1 ¼, 1
″
NPT
The locking clamp prevents the process screw joint of the installed SensoGate
WA131M with threaded connection from accidentally loosening. The locking
clamp is available for process connections with the following threads:
G1, G1 ¼, R1, R1 ¼, 1
″
NPT
.
The locking clamp can be used with threaded couplings with a minimum length
of 10 mm and an out
er diamet
er of 39 mm to 57 mm.
1.6 Hazardous Substances
In certain situations (e.g. sensor replacement or corrective maintenance), personnel may come into
contact with the following hazardous substances:
• Process medium
• Calibration or cleaning medium
• Lubricant
The operating company is responsible for conducting a risk assessment.
See the relevant manufacturer’s safety data sheets for hazard warnings and safety instructions on
handling hazardous substances.
