manualshive.com logo in svg

Knick SensoGate WA131M, User Manual

Share
Download
Knick SensoGate WA131M User Manual Download Page 5

SensoGate WA131M

5

1  Safety

The following safety instructions contain the necessary information for the safe use of the product. If

you have any questions, please contact Knick Elektronische Messgeräte GmbH & Co. KG using the in-

formation provided on the back page of this document.

1.1  Intended Use

SensoGate WA131M is a retractable fitting for installation in boilers, tanks, and pipes. The product is

used to accommodate a sensor for measuring process parameters. SensoGate WA131M allows the sen-

sor to move into the process medium. Moving to the SERVICE or PROCESS position must be performed

manually. While the process is in operation, the sensor can be replaced in the SERVICE position.
The defined operating conditions must be observed when using this product. 

➜

Specifications, p. 58

Thanks to its modular design, SensoGate WA131M can be adapted to changed conditions by the
customer. 

➜

Permissible Changes, p. 19

Using the product improperly or for any purpose other than the product's intended purpose is not

permitted and may result in injury to persons or damage to objects or the environment.
The SensoGate WA131M-X version is certified for operation in explosive atmospheres.

➜

Operation in Explosive Atmospheres, p. 9

1.2  Personnel Requirements

The personnel must be authorized by the operating company and instructed in handling this product.
The operating company must ensure that personnel are sufficiently qualified in accordance with the

local and national codes and regulations that apply for the area in which the product is being used.
Knick recommends the following minimum personnel qualifications:

Qualified personnel

Recommended minimum qualification

Operating personnel

Installing and operating machines and industrial plants
Detecting and eliminating minor malfunction states
Ensuring the operability of technical systems based on product documentation

Installation and
maintenance
personnel

Assembling, disassembling, maintaining, monitoring, and repairing electrical machines,
drive systems, and components in the automation industry
Installing cables and electrical equipment as an authorized and licensed electrician
Systematically troubleshooting and eliminating errors in electrical systems
Assessing processes and equipment with respect to the applicable safety and environ-
mental codes and regulations

See also

➜

Safety Training, p. 10

Summary of Contents for SensoGate WA131M

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands