manualshive.com logo in svg

Knick SensoGate WA131M, User Manual

Share
Download
Knick SensoGate WA131M User Manual Download Page 47

SensoGate WA131M

47

9.2  Spare Parts

Metal Immersion Tube, Short (149 mm)

Materials:
ZU0722, 1.4571 stainless steel
ZU0853, Hastelloy
ZU0893, titanium

Metal Immersion Tube, Long (204 mm)

Materials:
ZU0723, 1.4571 stainless steel
ZU0854, Hastelloy
ZU0894, titanium

Plastic Immersion Tube, Short (149 mm)

Materials:
ZU0825, PP
ZU0724, PEEK (HD)
ZU0726, PVDF (HD)

Plastic Immersion Tube, Long (204 mm)

Materials:
ZU0826, PP
ZU0725, PEEK (HD)
ZU0727, PVDF (HD)

ZU0739 Bellows

The bellows (only used on versions with liquid-electrolyte sensors) protect the fit-
ting beneath the pressure chamber against external contamination and wear.

ZU0889 Outlet Hose

The outlet hose is used to drain calibration, cleaning, or rinse media from the cali-
bration chamber. 

➜

Outlet Hose: Installation, p. 23

ZU0760 Scraper Ring, Reinforced, PTFE/PEEK

A reinforced scraper ring (with PEEK edge) for applications with adhering, sticky
media. Use the ZU0746 accessory tool to mount the scraper ring properly.

Summary of Contents for SensoGate WA131M

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands