24
Sensors with Liquid Electrolyte
SensoGate WA 132
Removing the Sensor
1) Before removing the sensor, make sure that the
retractable fitting is in
SERVICE position
and
secured with SensoLock (the rubber bellows is
expanded).
2) Remove the cable jack.
3) Before removing the sensor, check that there is
no liquid leaking from the outlet (process sealing
might be defective).
4) Loosen the small coupling nut
(R)
–
do not remove it.
5) Unscrew and remove the large coupling nut
(S)
and pull the detached unit upwards.
6) Remove the sensor
(A)
.
R
S
A
