21
Sensors with Solid Electrolyte
SensoGate WA 132
Removing the Sensor
Only remove the sensor when the retractable
fitting is in
SERVICE position
:
Move the SensoGate retractable fitting to SERVICE
position and secure it with SensoLock (red service
cap
(L)
is visible).
1) Before removing the sensor, check that there is
no liquid leaking from the outlet (process sealing
might be defective).
2) Rotate the extension
(V)
counterclockwise.
This unlocks the bayonet coupling.
Note:
The extension
(V)
can only be unlocked in
SERVICE position (safety function).
3) Pull off the extension
(V)
in direction of the
arrow. Now you can see the cable jack
(G)
.
L
V
V
G
Long Immersion Depth
