58
Setting Diagnostic Messages as Favorite
Select menu: Parameter setting/System control/Function control matrix
Example:
“Favorites” to be selected with
“Right softkey”
To select a softkey function:
Select desired function using arrow
keys,
press “Connect” softkey and
confirm with
enter
.
To deselect a function:
Press “Disconnect” softkey,
confirm with
enter
.
1
2
25.6 °C
Input OK2
98.1%Air
Return
Connect
Function control matrix (Administrator)
Left softkey
Right softkey
Profibus DO 2
ParSet KI rec. Fav Unical
–
–
–
–
–
–
Favorites
Selected Diagnostics functions can be called
directly from the measuring mode using a
softkey.
The table on the next page explains how to
select favorites.
Secondary Displays (1)
Here, additional values are displayed in the
measuring mode according to the factory
setting. When the respective softkey (2) is
pressed, the process variables measured by
the modules plus date or time are displayed.
In addition, you can use the
softkeys (2)
to
control functions.
To assign a function to a softkey, select
Parameter setting/System control/
Function control matrix
Function which can be controlled by softkeys:
• Parameter set selection
• KI recorder Start/Stop
1)
• Favorites
• Unical (fully automated probe controller)
2)
probe controller)
1) With Protos 3400(X)
2) With Protos II 4400(X) from FRONT firmware version 02.xx.xx.
