Knick Protos 3400 User Manual Download Page 20

Page: 20 / 212

PHU 3400(X)-110 Module

Measuring Circuit and Probe Control Function Blocks

The Protos 3400(X) is an expandable modular process analysis system.

For latest product information, please refer to:

www.knick.de

For a direct access to the function descriptions related to the Unical 9000(X)/

Uniclean 900(X) probe controller, please refer to the overview on the back page

of this manual.

You can document your specific settings for the Unical 9000(X) / Uniclean

900(X) probe controller in the Excel spreadsheet from the CD-ROM

(supplied with Protos 3400(X) or as download at www.knick.de)

Measuring Circuit and Probe Control Function Blocks

Probe Controller

The PHU 3400(X)-110 module allows connection of the Unical 9000(X) probe

controller for fully automated pH measurement, cleaning, and calibration or

the Uniclean 900(X) probe controller for fully automated pH measurement.

Measuring Circuit

Even without the Unical 9000(X) / Uniclean 900(X), the PHU 3400(X)-110

module is a fully fledged pH measuring module for simultaneous pH, ORP and

temperature measurement with glass electrodes.

This instruction manual describes the whole functionality of the

PHU 3400(X)-110 module corresponding to the following menu groups:

• Calibration

• Maintenance

• Parameter setting

• Diagnostics

Summary of Contents for Protos 3400





















































































































































































































Search results

Summary of Contents for Protos 3400

Reviews:

Related manuals for Protos 3400

Brands by name

Popular brands

Knick Protos 3400, User Manual

Search results

Summary of Contents for Protos 3400

Reviews:

Related manuals for Protos 3400

Brands by name

Popular brands