ProLine P16800
39
12.5 Voltage Output
Voltage level
Low < 1 V
High ≈ U
B
High (U
B
open) ≈ 5 V
7.2 V ± 0.3 V with detected standstill
(U
B
may not be open)
Reaction to middle voltage at input of P16800
Dependent on U
S
and prior input level
Voltage signal load capability
Max. 20 mA
Max. 2 mA with detected standstill
Protection from overload caused by external voltage
With max. U
B
/max. 200 mA
Short-circuit response
Short-circuit-proof (limited to 50 mA)
Voltage output cable lengths
Max. 100 m (0.25 nF/m)
Rise time
t
10 … 90
< 10 μs
12.6 Current Output
Passive current output, configurable
Suitable for following control inputs:
Low 6/7 mA, High 14 mA
Suitable for following control inputs:
Low 6/7 mA, High 20 mA
Active current output, configurable
Suitable for following control inputs:
Low 6/7 mA, High 14 mA
Suitable for following control inputs:
Low 6/7 mA, High 20 mA
Fault current signal
No
Can be activated at the factory:
With detected error 0 mA
Current signal level error
Max. 2 mA
Maximum load voltage
< U
B
– 2 V at 20 mA
< 5 V, if U
B
open
Internal parallel resistance to output
> 150 kΩ
Overload capacity, external voltage
Up to max. U
B
/ max. 200 mA
Open-circuit response
Open-circuit-proof
Rise time
t
10...90
< 10 μs
(pulse edge slope for ohmic loads)
