manualshive.com logo in svg

Knick PORTAVO 904X PH, User Manual

Share
Download
Knick PORTAVO 904X PH User Manual Download Page 7

7

Intended Use

The Portavo 904(X) PH is a portable pH me-
ter. With a plain text line on a high-contrast 
LCD, operation is largely intuitive. The device 
variant 904X PH is available for applications 
in hazardous locations up to Zone 0.
The meter stands out by the following fea-
tures:
•  Use of digital Memosens sensors
•  Memosens sensors and DIN pH sensors 

can be used on one device.

•  A detachable quiver protects the sensor 

and prevents it from drying out. Further-
more, it can be used for calibration. 

•  The rugged housing is made of a 

high-performance polymer. It provides 
high impact resistance and dimensional 
stability even when exposed to extreme 
moisture.

Overview of the Portavo 904(X) PH 

Quiver

•  Scratch-proof clear glass display, perfectly readable even after years
•  Very long operating times with one set of batteries (4x AA) or use of a Li-ion bat-

tery for reliable operation even at high or very low operating temperatures (Li-ion 
battery not suited for Portavo 904 X PH for application in hazardous locations)

•  Data logger with 5000 values
•  Micro USB port for communication with Paraly SW 112 PC software for data 

 evaluation of digital sensors (Memosens)

•  Sensoface icons provide single-glance information on the sensor condition 

(page 40)

•  Calibration with “Calimatic” automatic buffer recognition (page 17)
•  Manual calibration by free specification of buffer values
•  Real-time clock and display of battery charging level
•  At measuring temperatures from -20 to +100 °C the temperature detector can be 

automatically identified.

Summary of Contents for PORTAVO 904X PH





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands