Knick PORTAVO 904X PH, User Manual

Page: 29 / 68

29
Data Logger
Data Logger Menu
Logger view Select using arrow keys, confirm by pressing
set
.
CONT Select start address and start the data logger
START Deletes all entries and starts the data logger at start
address 0001
DEL Deletes all entries
SET Selects and configures logger type (see table
below)
set
Data Logger
Configuring the Data Logger
Prerequisite: The data logger is stopped (press
meas
).
Measurement
Measured value is maintained
Logger: CONT blinks
Logger: START blinks
Logger: DEL blinks
Logger: SET blinks
Logger: Current logger type
blinks Select desired logger type using  : DIFF,
INT, DIFF+INT or SHOT.
set
Select the appropriate parameters using  and confirm each selection by press-
ing
set
. When configuration is finished, CONT blinks. You can start the data logger
by selecting START or CONT (see page 31).