manualshive.com logo in svg

Knick Portavo 904X COND, User Manual

Share
Download
Knick Portavo 904X COND User Manual Download Page 53

53

pH

Oxy Cond

Error and Status Messages

Error messages are indicated as “ERROR …” on the display. Information on the sensor 
condition is indicated by the “Sensoface” icon (friendly, neutral, sad) possibly accom-
panied by an info message (“INFO …”). 

Sensoface (the “smiley” icon) provides 
information on the sensor condition (main-
tenance request). Measurement can still be 
performed. After a calibration, the corre-
sponding Sensoface icon (friendly, neutral, 
sad) is shown together with the calibration 
data. Otherwise, Sensoface is only visible in 
measuring mode. 

The most important error messages and 
“Sensoface” info messages are shown on 
the inside of the protective cover.  
A complete list of messages and their 
meanings is provided in the following 
tables.

Example of a “Sensoface” message:  
INFO 1 (cal timer expired) 

Example of an error message:  
ERROR 1 (value out of range) 

Summary of Contents for Portavo 904X COND





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands