15
Press the set key to access configuration mode.
Prior to measurement, a configuration should be performed to match
the connected sensor and the desired measurement performance.
Furthermore, you can select the suitable calibration method. The
following table gives you an overview.
Factory settings are shown in bold print.
Measurement
set
“SETUP” view
Select using arrow keys, confirm by pressing set.
LIQU | GAS
Sat. %Air | Concentration in mg/l
(
if MEAS MEDIUM =
LIQU)
OFF | date + time | date | time
0.0 … 100.0 % (if MEAS MEDIUM = GAS)
0 … 4000 m
0.0 … 45.0 g/kg
AIR CAL | ZERO CAL | DATA INPUT | FREE CAL
OFF | 1 … 99 days
OFF | 12h | 6h | 1h | 0.1h
°C | °F
24h | 12h
DD.MM.YY | MM.DD.YY
Enter TAN to enable option
(see page 32)
OFF (0000) | 0001 ... 9999
(with option 001 SOP only, see page 33)
NO | YES (reset to factory settings)
Note: All data logger entries will be deleted.
This icon prompts you to select a menu item using the arrow keys – the selec-
tion is confirmed by pressing set.
Configuration
