Knick P45000, User Manual

Page: 7 / 38

P45000
7
2 Product
2.1 Package Contents
• P45000 in the version ordered
• Installation Guide with safety instructions
• Test Report 2.2 according to EN 10204
2.2 Product Identification
The different versions of the P45000 are encoded in a product code.
The product code is specified on the nameplate (extract). The actual product type can be determined
from this code together with the order description stated on the product’s front label (device front).
2.2.1 Product Code
High voltage transducer
P45 _ _ _ K 2 _ _ _ / _ _ _ _
Type test voltage 10 kV,
rated voltage U
in,n
[V]: 500, 750, 1000, 1500
0 /
Type test voltage 20 kV,
nominal voltage U
in,n
[V]: 500, 750, 1000, 1500, 2000, 2800, 3000
1 /
I
out
= ±50 mA; 3-wire connection, bipolar
0 0 /
I
out
= 10 … 50 mA; 3-wire connection, unipolar
1 1 /
I
out
= 4 … 20 mA; 4-wire connection, unipolar
3 /
1)
I
out
= ±20 mA; 4-wire connection, bipolar 5 0 /
1)
I
out
= ±10 V; 4-wire connection, bipolar 6 0 /
1)
Without SIL 0 /
With SIL 1 /
Enclosure type K 2 /
Wall mount only 0 /
Wall mount / 35-mm DIN rail 1 /
HV connection: Screwed contact/ring cable lug 0 /
HV connection: potted cable 1 /
Output/power supply: Push-in terminals 1 /
Output/power supply: Screw terminals 2 /
Input rated voltage: U
in,n
= xxxx V / x x x x
2.2.2 Example of a Version
High voltage transducer P45 0 0 0 K 2 1 0 1 / 1 0 0 0
Type test voltage 10 kV,
rated voltage U
in,n
[V]: 500, 750, 1000, 1500
0 /
I
out
= ±50 mA; 3-wire connection, bipolar 0 0 /
Without SIL 0 /
Enclosure type K 2 /
Wall mount / 35-mm DIN rail 1 /
HV connection: Screwed contact/ring cable lug 0 /
Output/power supply: Push-in terminals 1 /
Input rated voltage: U
in,n
= xxxx V / 1 0 0 0
1)
Listed in user manual.