MemoTrans
5
1 Basic Safety Instructions
1.1 Personnel Requirements
• Installation, commissioning, operation, and maintenance of the measuring system may be carried
out only by specially trained technical personnel.
• The technical personnel must be authorized by the system operator to carry out the specified
activities.
• The electrical connection may be performed only by a licensed electrician.
• The technical personnel must have read and understood this User Manual and must follow the
instructions contained therein.
• Faults at the measuring point may only be rectified by authorized and specially trained personnel.
Note:
Repairs not described in the User Manual provided must be carried out only directly at the
manufacturer’s site or by the service organization.
1.2 Intended Use
The device is a transmitter for connecting digital sensors with Memosens technology. It is preset for
sensor parameters and a measuring range span with 4
…
20 mA communication.
The device is designed for use in the following industries:
• Life science
• Chemistry
• Water and wastewater
• Food and beverage
• Power plants
• Other industrial applications
1.3 Symbols and Markings on the Product
CE marking
Special conditions and the product’s possible danger points. Read the user manual, observe the
specifications, and follow the instructions in the safety guide.
Reminder to read the documentation.
1.4 Occupational Safety
As the user, you are responsible for complying with the following safety conditions:
• Installation guidelines
• Local standards and regulations
• Regulations for explosion protection
Electromagnetic Compatibility
• The product has been tested for electromagnetic compatibility in accordance with the applicable
European standards for industrial applications.
• The electromagnetic compatibility indicated applies only to a product that has been connected in
accordance with this User Manual.
