Knick 830 R, Manual

Page: 93 / 216

E-93
English
6.2 Basic Parameter Settings
The following parameters are factory set:
After connection to the current loop, the
indicator is ready for operation.
2 sec after application of the current, a
segment test is performed for 3 sec.
Parameter Value Remark
Span 0 – 100.0 4 – 20 mA
Bargraph 4 – 20 4 – 20 mA, bargraph parallel
to display
Relay output min. 20.0
max. 80.0
For Options 290/291 only
Normally closed contact n/c
Hysteresis 0
Switch-on delay 2 s
Display flashing Y FL
(flashing on)
Passcode 0000 No passcode prompt