Knick 830 R, Manual

Page: 104 / 216

E-104
SPAN Menu
Setting the Span of the Digital Display
• Activate parameter mode.
• Hold down the key for 2 sec.
• Select SPAN menu and confirm.
Start and end of scale are user defined
anywhere within the range 0000 to
±9999 counts.
Span may be up to 10000 counts.
• Enter the start of scale at 4 mA (0 mA) for
the digital display.
The decimal point will be set later.
• Select and edit digits.
To enter a negative value, step through
the leading digit until the negative sign is
displayed.
• Confirm entry.