Diaphragm liquid pump NF 2.35
Servicing
KNF Flodos AG BA_NF2-35_EN_02_164912
Translation of original Operating and Installation Instructions
15
8. Servicing
8.1. Servicing schedule
Component
Servicing interval
Pump
-
Regular inspection for external
damage or leaks
Pump head
-
Clean if the flow rate decreases, the
pump does not work or no vacuum
is created (Chapter 8.2)
Diaphragm, valve
plates and seals
-
Change as soon as pumping capac-
ity decreases, preferably sooner
Filter (accessory)
-
Change if it is dirty
Tab. 8
8.2. Disassemble pump head
WARNING
Health hazard due to dangerous
substances in the pump
Depending on the medium transferred, caustic burns
or poisoning are possible.
➔
Wear protective clothing if necessary, e.g. pro-
tective gloves.
➔
Flush the pump with a neutralising liquid and
pump empty.
8.2.1. Preparations for disassembly
1. Flush the pump with a suitable neutralising liquid, and make
sure that no dangerous substances are left in the pump
2. Empty the pump
3. Separate electrical connections
4. Disconnect hoses from pump head
Qty
Tool
1
T10 Torx screwdriver
Tab. 9
Information on procedure
Tool
