Diaphragm liquid pump NF 1.300 EX
Installation and connection
KNF Flodos AG BA_NF1.300EX_EN_05_152146
English translation of original Operating and Installation Instructions
13
6. Installation and connection
Only install pumps under the operating parameters and conditions
described in Chapter 4, Technical data, and in Section 2.3, Using
the pump in a potentially explosive atmosphere.
Observe the safety precautions (see Chapter 3).
6.1. Installation
➔
Before installation, store the pump at the installation location to
bring it up to ambient temperature.
➔
Mounting dimensions (see Fig. 3)
NF1.300 Ex
NF1.300.27 Ex
Fig. 3: Mounting dimensions NF1.300 Ex
➔
For pumps with fan: When installing the pump, make sure that
the
motor’s fan can draw in an adequate amount of cooling air.
➔
Make sure that the installation location is dry and the pump is
protected against water in the form of rain, spray, splashes and
drips.
➔
Protect the pump against dust.
➔
Protect the pump against vibration and impact.
Mounting dimensions
Cooling air supply
Installation location
Summary of Contents for NF 1.300 EX
Page 29: ......
Page 30: ......
Page 31: ......
Page 32: ...KNF worldwide Please find your local KNF partners at www knf com...
