Diaphragm pump N87.9
Safety
Translation of Original Operating and Installation Instruction, english, KNF 121538-121541 11/22
9
2.7 Directives and standards
EU/EC
Directives
EU Declaration of Conformity
The pumps comply with directives/ordinances:
§
Directive 2014/35/EU on the harmonization of the laws of the Member
States relating to the provision of electrical equipment for use within
certain voltage limits on the market
§
Directive 2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (Annex II changed
by delegated Directive (EU) 2015/863 of the Commission)
Standards The following harmonized/named standards serve as the basis:
§
EN IEC 63000
§
EN 60204-1
EU/EC
Directives
Declaration of incorporation – for partly completed machines
Within the meaning of the Machinery Directive 2006/42/EC, the pumps are
partly completed machinery and are therefore to be regarded as not ready
for use. Partly completed machinery may not be commissioned until it has
been determined that the machine into which the partly completed machin-
ery is to be installed complies with the provisions of the Machinery Direc-
tive 2006/42/EC. The following fundamental requirements of Annex I of Di-
rective 2006/42/EC (general principles) are applied and observed:
§
General principles no. 1
Standards The following harmonized standards serve as the basis:
§
EN 55014-1/2
§
EN IEC 61000-3-2
§
EN 61000-3-3
§
EN 60204-1
2.8 Customer service and repair
Customer service and repairs The pump is maintenance-free. However, KNF recommends periodic in-
spection of the pump for obvious changes in noise or vibration.
Only have repairs to the pumps performed by qualified KNF personnel.
Housings with electrically live components may only be opened by special-
ist personnel.
Use only genuine spare parts from KNF when performing servicing work.
2.9 Disposal
Environmental protection
Store the pump and all spare parts in accordance with the environmental
provisions . Observe the national and international regulations. This ap-
plies in particular to parts that are contaminated with toxic substances.
If you no longer need your packaging materials (e.g. for return shipment or
other transport of the vacuum system), dispose of them in an environmen-
tally friendly manner.
Old devices must not be disposed of with household waste. Proper dis-
posal and recycling help to protect natural resources and the environment.
The end user is responsible for disposing of old devices in accordance
with national and international regulations.Alternatively, KNF products (old
devices) may also be returned to KNF for a fee (see Chapter
).