KNF N87.9 Operating And Installation Instructions Download Page 3 | Manualshive

Page: 3 / 32

KNF N87.9 Operating And Installation Instructions Download Page 3

Diaphragm pump N87.9

About this document

Translation of Original Operating and Installation Instruction, english, KNF 121538-121541 11/22

3

1 About this document

1.1 Using the operating and installation instructions

The operating and installation instructions are part of the pump.

à

In the event of uncertainties with regard to the content of the operating
and installation instructions, please contact the manufacturer (contact
data: see www.knf.com). Please have the type and serial number of
the pump ready.

à

Read the operating and installation instructions before you commission
the pump.

à

Give the operating and installation instructions only completely and un-
changed to the next owner.

à

Keep the operating and installation instructions within reach at all
times.

Project pumps For customer-specific project pumps (pump models that begin with "PJ" or

"PM"), there may be deviations from the operating and installation instruc-
tions.

à

For project pumps, also observe the agreed specifications.

Optional contents Project-specific options may be included in the operating and installation

instructionsThese are marked as "optional". It is also possible that project-
specific deviations may not be included in the operating and installation in-
structions.

1.2 Exclusion of liability

The manufacturer assumes no liability for damages and malfunctions re-
sulting from failure to observe the operating and installation instructions.

The manufacturer assumes no liability for damages and malfunctions re-
sulting from changes or modifications to the device and improper handling.

The manufacturer assumes no liability for damages and malfunctions re-
sulting from impermissible spare parts and accessories.

«
1
2
3
4
5
...
»

Summary of Contents for N87.9

































Reviews:

No comments