background image

Liquid pulsation damper 

Use 

KNF Flodos BA_FPD_EN_04_069182 
Translation of Original Operating and Installation Instructions

 

2.  Use 

 

Intended use 

2.1.

The liquid pulsation damper is intended for pulsation damping 

when transferring and metering liquids. 

Owner's responsibility 

Only  install  and  operate  the  liquid  pulsation  damper  under  the 
operating  parameters  and  conditions  described  in  Chapter  4, 

Technical data. 

Only complete liquid pulsation dampers may be taken into service. 

Before transferring or metering a medium, check that it can be 

transferred without risk in the specific application case. 

Before using a medium, make sure that it is compatible with the 
materials used to construct the upper section and the separating 

diaphragm. 

The temperature of the medium must lie within the permissible 

temperature range (see Chapter 4). 

The transferred medium should not contain  particles as these can 
prevent  the  liquid  pulsation  damper  from  working  correctly.  If  this 
cannot be ensured, a filter  with a sufficiently  large filter area must 

be used upstream of the liquid pulsation damper. 

The  .51  versions  of  our  liquid  pulsation  dampers  have  been  certi-
fied  by  NSF  according  to  the  standard  NSF/ANSI  169  and  are 

therefore suitable for use with foodstuffs without any restrictions. 

All materials used have been checked through a series of toxico-
logical tests. In order to ensure that the food grade quality is main-
tained, NSF will carry out a yearly audit checking our certified 

products. 

Only the liquid pulsation dampers marked with ".51" are NSF-
certified and contain a defined material combination that also has a 

FDA certificate of conformity. 

NSF: National Sanitary Foundation 
FDA: Food and Drug Administration 

ANSI: American National Standard Institute 

* Liquid pulsation dampers with other customer-specific certified material 
combinations are available on request. 

 

  All certified liquid pulsation dampers are clearly marked with 

“.51” in the type designation along with the NSF-logo on the 
type plate. If either or both of these markings are missing, the 

liquid pulsation damper is not certified. 

Operating parameters and 

conditions 

Requirements for 

transferred medium 

.51* version 

– version with food 

grade approval 

Summary of Contents for FPD 06



















Reviews:

Related manuals for FPD 06