9
1.4 Rating plate and serial number
The rating plate is to be found on the right-hand
side of the machine.
The machine serial number is to be found on the
rating plate and in the machine room, visible due
to the KNECHT logo.
1.5 Figure and item numbers in the operating instructions
If there is a reference to a machine component in the text which is depicted in an image, the
figure and item number will be given in parentheses.
Example: (7-5/1) means Figure number 7-5, item 1.
The workpieces are mounted and correctly aligned on
the rotary table by means of centering pieces (7-5/1) and
the follower (7-5/2). The corresponding centering piece is
placed in the bore at the center of the rotary table.
The follower is used to attach smaller workpieces to the
rotary table.
1. Important notes
Figure 1-1
Rating plate
Figure 1-2
Machine serial number
Figure 7-5
Centering piece and follower
2
1
