The light keeps flickering as
shown on the right figures.
14
The buttons do not work
The kneader makes an
unusual sound while operating
Is the blade rotating?
→
→
→
→
If it does not go back to normal by turning the power switch OFF
and to ON, please contact our support desk for repairment.
All the LED lights come on.
One or two lights come on.
Is the plug unplugged from the outlet?
Is the power switch off?
The body of the kneader
is hot when touched
Please check the following before making a repair request.
Problem
The kneader is not rotating
Is the SPEED knob at the left end?
Things to Check
Is this directly after use?
The body of the kneader becomes warm during and
directly after use. However, if there is smoke or an abnor-
mal smell, stop operations immediately, unplug the plug
and inquire at shop where purchased.
Sometimes it makes a high pitch sound while the blade is
rotating but there is no malfunction.
Model number: This is listed on the operation unit and the cover of this User’s Manual
Serial number: This is listed on the label on the bottom of the body of the kneader
Operation unit display: When there is a display on the operation unit
If the kneader does not improve despite following the above table, please inquire at shop where
purchased for consultations.
When making an inquiry, we may ask for the model number, serial number and the details displayed
on the operation unit, so please check these in advance.
Insert the plug into the outlet and turn on the power switch.
Try turning the speed knob to the right.
Troubleshooting
