14
Valve drives S 6/12/16 as parts of the Smartline Assistant 6000
Assembling a remote control cable
If the remote control is performed not using the RS-232 interface a different type of
control cable must be assembled
for each application. Use the set plug strips with
connectors enclosed in the delivery to prepare your cable according the following
SOP.
SOP 2
Connecting the plug strips
Use this SOP for connecting wires to the plug strips.
1. Press down the cable clip as shown in
Fehler! Verweisquelle konnte nicht
gefunden werden.
using a small srew driver or the WAGO liner tool.
2. Insert the uninsulated end of the cable into the opening under the latch.
3. Remove the tool from the plug. The cable is now firmly anchored in the plug
strip.
Fig. 7 Connecting the Plug Strips
Valve drives S 6/12/16 as parts of the Smartline Assistant 6000
The valve drives S 6/12/16 as well as the UV-Detector 200 and/or the Pump S 100
can be an integrative part of the Smartline Assistant 6000. Up to three of these
instruments can be placed in one Smartline housing. Thus, even a whole HPLC
system can be put into one modul.
1 2
3
Fig. 8 Front view of the Smartline Assistant 6000 (A5003V065), with:
1
UV Detector 200,
2
Smartline Pump 100 and
3
injection valve (manual)
Summary of Contents for Smartline S12
Page 2: ......