5
Disassembling the housing
Protective measures
The following applies for all repairs on the device:
Disassembling the
housing
Disassembly of the device hood and side panels is necessary
when carrying out certain repairs inside the device.
Removing the device hood
The device hood is attached to the rear panel of the device
by two hexagon socket screws.
Procedure
The following steps are recommended for opening the housing:
1. Switch off the device and pull the power plug
2. Remove the hexagon socket screws of the device hood
3. Push back the device hood and lift off
Tools
Hex socket screwdriver size 2
Duration
Approx. 3 min
Level of difficulty
Level 2 (from 1 to 7, very easy to very difficult)
Hazard symbol
Warning instructions
DANGER! Danger due to toxic, caustic
or radioactive substances due to con-
tamination of the device.
The customer must ensure that the
device has been thoroughly deconta-
minated before repairs are performed.
Caution! Micro-electronic device com-
ponents that could be damaged by
electro-static discharge (ESD) when
touched.
Take precautions against electrostatic
discharge.