23
Disassembling the housing
Disassembling the
housing
Disassembly of the housing hood and the sides of the device is
necessary when carrying out certain repairs inside the device.
Removing the housing hood
The housing hood is attached to the rear side of the device by
2 hexagonal socket screws.
Procedure
The following steps are recommended for opening the housing:
1. Switch off the device and pull the power plug
2. Remove the hexagonal socket screws of the housing hood
3. Push back the housing hood and remove
Tools
Hexagonal socket screwdriver size 2 mm
Duration
About 3 minutes
Level of difficulty
Level 2 (from 1 to 7, very easy to very difficult)
Result
The housing hood has been opened.
Process
Figure
1. Remove both hexa-
gon socket screws
(A) on the back of
the device.
Fig. 23
Unscrewing the housing
hood
1. Push back the
housing hood (B)
about 2 cm; using
both hands, lift to
remove.
Fig. 24
Opening the housing hood
A
B
