AZURA® Valve Unifier VU 4.1 Instructions V6855
Operation 28
Process
Figure
IP address
1.
In the LAN Setup display, select the submenu
IP Addr with the navigation buttons.
2.
Press selection button.
3.
Using the navigation buttons, navigate to the
value that has to be changed.
4.
Finish the process by pressing the confirma-
tion but ton.
IP Addr
19
2
.168»
Netmask
1.
In the LAN Setup display, select the submenu
Netmask with the navigation buttons.
2.
Press selection button.
3.
Using the navigation buttons, navigate to the
value that has to be changed.
4.
Finish the process by pressing the confirma-
tion but ton.
NetMask
25
5
.255»
Gateway
1.
In the LAN Setup display, select the submenu
Def with the navigation buttons. Choose GW.
2.
Press selection button.
3.
Using the navigation buttons, navigate to the
value that has to be changed.
4.
Finish the process by pressing the confirma-
tion but ton.
Def.GW
19
2
.168»
7.6.4
Input
In this submenu, the control can be switched from manual to binary
(see chapter „6.8.1 Binary code“ on page 18).
Process
Figure
1.
Change to Input display: Main Display >
Drive Setup > In.Pins
2.
Press selection button.
3.
Change the setting (Inputs/BinCode) via the
naviga tion buttons.
4.
Finish the process by pressing the confirma-
tion but ton.
In.Pins
Input
s
