KNAUER
P 6.1L User Manual V6890 Version 1.2
8
Intended Use
Side View
On the side of the pump, the Control Unit (see "Control with
Control Unit” on page 37) connector is located.
Features
The pump is used to convey liquids, either in an HPLC system or
as a stand-alone device. Liquids are conveyed either with con-
stant flow or with constant pressure. The flow and pressure,
which liquids can be conveyed with, depend on the pump head.
Pump Heads
Pump heads for several areas of application are available for the
pump P 6.1L.
Legend
1
Serial number
2
Interface for the
Technical Support
3
Pin header
4
LAN port
5
Power connection
and power switch
Fig. 4
Rear view (example)
1
2
3
4
5
Legend
1
Control Unit
port
Fig. 5
Side View
1
Standard
Bio-inert
Size
5 ml, 10 ml and 50 ml
10 ml and 50 ml
Material
Pump head with stainless
steel inlays
Pump head with ceramic
inlays
