26
Operation
AZURA® Detector UVD 2.1S Instructions, V6820
through wireless LAN. You find a detailed description on Mobile Control
in its accompanying instructions.
5.3 Basic operation
The status display shows the values for absorption and wavelength.
Legend
Legend
1
Absorption
2
Wavelength
Fig. 11
Status display
Note:
When the deuterium lamp has been turned off or is heating, the
absorption values are substituted by OFF or HEAT, respectively.
There are 3 buttons on the detector that can be used for basic operation.
Using the buttons, you can monitor the device and change the settings.
Note:
To avoid falsifying measuring values, KNAUER recommends to
press the Autozero button before every measurement and after exchan-
ging eluents.
Function
Figure
Keep left arrow key
pressed. Scroll using
the right arrow key.
Fig. 12
Arrow keys
Press any of the arrow
keys to set values and
to change settings.
Initiating an autozero:
Absorption is set to
0.000.
Fig. 13
Autozero
5.4 Controlling the device
You can control the device using the buttons on the front panel. Handle
the buttons in the following manner:
Keep left arrow key pressed. Scroll through the menu using the right
arrow key.
Let go of left arrow key and, using both arrow keys, set the values.
+0.24626
243
1
2
o
AZ
