21
Installation and initial startup
AZURA® Detector UVD 2.1S Instructions, V6820
Process
4.
Enter the IP address into the text field <IP address>
3
.
5.
Optionally, adjust subnet mask and gateway
4
.
6.
Click <Reset Conn. Settings>
5
to accept changes.
7.
Restart the device (recommended).
The device is now accessible via the static IP address.
4.9.5 Firmware Wizard: Setting a dynamic IP address
The device is switched on.
Firmware Wizard is installed and running.
The connection between Firmware Wizard and the device has been
established.
Process
1.
In Firmware Wizard, cleck <Reset LAN Settings...>.
2.
The window <Device connection settings> opens. Enter serial num-
ber of the device into the text field <Target device serial number>
1
.
3.
Select option <Obtain an IP address automatically>
2
.
4.
Click <Reset Conn. Settings>
5
to accept changes.
5.
Restart the device (recommended).
The device is now accessible via a dynamic IP address.
Result
Prerequisites
Procedure
Result
