Knauer Azura Assistant ASM 2.2L, Instructions Manual, Page: 47 / 55

AZURA® Assistant ASM 2.2L Instructions V6803
42 Transport and storage
Procedure Figure
1. Using the open-end wrench,
disconnect the first capillary
and close the opening with a
hole plug.
2. Using the open-end wrench,
disconnect the first capillary
and close the opening with a
hole plug.
3. Disconnect the power cable
from the connector
1
on the
rear side.
If you want to ship the device, reuse the packaging materials that you
received with the delivery.
13. Transport and storage
Regarding the following information, carefully prepare the device for trans-
port or storage.
13.1 Taking the device out of operation
The device is switched off.
Procedure Process
1. Pull the power plug out of the socket and then out of the device.
2. Pack the power cable together with the device.
Disconnect all electrical connections. Remove the accessories and pack the
device for transport or storage.
13.2 Packing the device
ƒ
Original packaging: Ideally you should use the original transport packag-
ing.
ƒ
Lifting: Grab the device around the center of both sides and lift it into the
packaging. Do not hold onto front cover or leak tray, as these parts are
loosely attached to the device.
13.3 Transporting the device
ƒ
Documents: If you want to return your device to KNAUER for repairs, en-
close the „ Service request form and decontamination report “ which can
be downloaded from our website.
ƒ
Device data: For a secure transport, note the weight and dimensions of
the device (see chapter “15 Technical data”, p. 44).
Process
1
Next Steps
Prerequisites
Next steps