AZURA® Assistant ASM 2.2L Instructions V6803
10
Symbols and signs
Component defect
Possible damage to the pump piston by tilting the pump head.
Tighten diagonally opposite fastening screws evenly one turn at a
time.
Also loosen the fastening screws evenly.
Installing the pump head
Component defect
Possible damage to the pump head due to over-tightened capillary
fitting.
Note the torque of the screw connection.
3.4
Valve drive and valves
There are no special safety instructions for the valve drive.
Please observe the safety instructions for valves V 4.1:
www.knauer.net/v6864_en
.
4. Symbols and signs
The following table explains symbols and labels which are used on the
device or the device modules , in the software or in the instructions:
Symbol
Meaning
Device fulfills the requirements of the Conformité
Européenne, which is confirmed by the Declaration of
Conformity.
High-voltage hazard
(AZURA® Assistant ASM 2.2L)
Danger of burns caused by hot deuterium or halogen
lamps! Remove device module and allow the lamps to
cool down for at least 15 minutes!
(Device module AZURA® Detector UVD 2.1S)
Damage to the leak tray or front cover possible while
carrying, setting up and installing a device. Grip the
device at its sides near the middle when lifting or
moving.
Electrostatic-discharge hazard
Testing seals in Canada and the USA at nationally
recognized testing centers (NRTL). The certified device
or system has successfully passed the quality and
security tests.