AZURA® Assistant ASM 2.2L Instructions V6803
Initial startup 23
Procedure
Process
Figure
5. Attach the waste nozzle
6
to
the bottom unit
6. Attach the wastehose o the
waste nozzle and connect it to
the waste container.
7. Place the waste container
below the devices.
6
Fig. 11
Leak tray with
waste nozzle
Attach the front cover.
8.2
Connecting the device to a computer
Note:
HPLC devices made by KNAUER work only with IP adresses which
are assigned via IPv4. IPv6 is not supported.
This section describes how to set up an HPLC system in a local area net-
work (LAN) and how a network administrator can integrate this LAN intoy-
our company network. The description applies to the operating system
Windows® and all conventional routers.
To set up a LAN, we recommend to use a router. That means the following
steps are required:
1.
On the computer, go to the control panel and check the LAN proper-
ties.
2.
Hook up the router to the devices and the computer.
3.
On the computer, configure the router to set up the network.
4.
Install the chromatography software from the data storage device.
5.
Switch on the device and run the chromatography software.
8.2.1
Configuring the LAN settings
The LAN uses only one server (which is normally the router) from that the
devices automatically receive their IP address.
In Windows, power saving, hibernation, standby, and screen saver must
be deactived.
In case you use an USB-to-COM box, the option "Allow the computer
to turn off the device to save power" in the device manager must be
deactivated for all USB hosts.
For all LAN devices: For the network adapter, the following option in
the device manager must be deactivated: “Allow the computer to turn
off this device to save power”.
1.
In Windows choose Start
à
Control Panel
à
Network and Sharing
Center
.
2.
Double-click on
LAN Connection
.
3.
Click on the button
Properties
.
4.
Select
Internet Protocol version 4 (TCP/IPv4)
.
5.
Click on the button
Properties
.
6.
Check the settings in the tab
General
. The correct settings for the
DHCP client are:
a) Obtain an IP address automatically
b) Obtain DNS server address automatically
Next steps
Process
Prerequisites
Procedure