AZURA® Assistant ASM 2.2L Instructions V6803
16
Product information
5.6.3
Valve drive AZURA® Valve unifier VU 4.1
Note:
The ASM 2.2L can be equipped with a maximum of
three VU 4.1 valve drives.
The valves V 4.1 are driven by the valve drive VU 4.1, but must be
ordered separately. An overview of the valves supported can be
found at:
www.knauer.net/valves-assistant.
Legend
1
Valve drive
Fig. 5
Valve drive AZURA® VU 4.1 in ASM 2.2L
Further information on the valve drive VU 4.1 can be found in the
AZURA® Valve Unifier VU 4.1 Instructions (document number
V6855):
www.knauer.net/uvd2.1s-manual
.
5.6.3.1 Mounting the valve onto the valve drive
Before inserting the valve, check that the pin
1
on the back of
the valve is in a horizontal position (see Fig. 6). The notch
2
is
on the left, the RFID tag
3
points upwards.
Note:
If the pin is in a different position, insert the valve into
the drive coupling of the adapter and turn the valve until the
pin snaps into the drive coupling.
Legend
2
Pin
3
Notch
4
RFID tag
Fig. 6
Rear view of the valve
Screwdriver, TX 10
1
Prerequisites
3
1
2
Tools