ASM 2.1L user manual V6815
Legal information
30
Legal information
Transport damage
The packaging of our devices provides the best possible protection
against transport damage. Check the devices for signs of transport dam-
age. In case you notice damages, contact the Technical Support and the
forwarder company within three workdays.
Warranty conditions
The factory warranty for the device is stipulated by contract. During the
warranty period, any components with material or design-related defects
will be replaced or repaired by the manufacturer free of charge. Please
connect to our website for further information on terms and conditions.
All warranty claims shall expire in the event that any unauthorized changes
are made to the device. This warranty also excludes the following:
accidental or willful damage
damage or errors caused by third parties that are not contractually
related to the manufacturer at the time the damage occurs
wear parts, fuses, glass parts, columns, light sources, cuvettes and
other optical components
damage caused by negligence or improper operation of the device
and damage caused by clogged capillary
packaging and transport damage
In the event of device malfunctions, directly contact the manufacturer.
KNAUER Wissenschaftliche Geräte GmbH
Hegauer Weg 38
14163 Berlin, Germany
Phone:+49 30 809727-111
T49 30 8015010
e-mail:
Internet:
Declaration of conformity
The Declaration of Conformity is part of the delivery and accompanies the
product as a separate document.
Disposal
Hand in old devices or disassembled old components at a certified waste
facility, where they will be disposed of properly.
AVV Marking in Ger-
many
According to the German "Abfallverzeichnisverordnung" (AVV) (January,
2001), old devices manufactured by KNAUER are marked as waste electri-
cal and electronic equipment: 160214.
WEEE Registration
KNAUER as a company is registered by the WEEE number DE 34642789
in the German "Elektroaltgeräteregister" (EAR). The number belongs to
category 8 and 9, which, among others, comprise laboratory equipment.
All distributors and importers are responsible for the disposal of old
devices, as defined by the WEEE directive. End-users can send their old
devices manufactured by KNAUER back to the distributor, the importer, or
the company free of charge, but would be charged for the disposal.
Solvents and Other
Operating Materials
All solvents and other operating materials must be collected separately
and disposed of properly.