DAD 6.1L/DAD 2.1L/MWD 2.1L user manual V6700, version 3.2
50
Legal Information
Conditions for Specification
Technical data has been determined in accordance with the ASTM standard
E1657-98: “Standard Practice for Variable-Wavelength Photometric Detec-
tors Used in Liquid Chromatography”.
Reference conditions: test cell at wavelength 254 nm/8 nm with reference
wavelength 360 nm/30 nm, time constant 2 s, data rate 1 Hz.
Linearity (5%): Linearity is measured with caffeine at 274 nm/8 nm and
time constant 2 s with a flow cell path length 10 mm.
Performance tests should be done with a completely warmed up optical unit
(> 2 hours). ASTM measurements require that the detector should be
turned on at least 24 h before start of testing. ASTM drift tests require a
temperature change below 2 °C/hour over a one hour period.
Legal Information
Transport Damage
The packaging of our devices provides the best possible protection against
transport damage. Check the devices for signs of transport damage. In case
you notice damages, contact the Technical Support and the forwarder com-
pany within three workdays.
Warranty Conditions
The factory warranty for the device is stipulated by contract. During the
warranty period, any components with material or design-related defects
will be replaced or repaired by the manufacturer free of charge. Please con-
nect to our website for further information on terms and conditions.
All warranty claims shall expire in the event that any unauthorized changes
are made to the device. This warranty also excludes the following:
accidental or willful damage
damage or errors caused by third parties that are not contractually
related to the manufacturer at the time the damage occurs
wear parts, fuses, glass parts, columns, light sources, cuvettes and other
optical components
damage caused by negligence or improper operation of the device and
damage caused by clogged capillary
packaging and transport damage
In the event of device malfunctions, directly contact the manufacturer.
KNAUER Wissenschaftliche Geräte GmbH
Hegauer Weg 38
14163 Berlin, Germany
Phone:
+49 30 809727-111
Telefax:
+49 30 8015010
e-mail:
Internet:
Declaration of Conformity
The Declaration of Conformity is part of the delivery and accompanies the
product as a separate document.
weight
12.2 kg
leak sensor
yes