11
Lineup
Unpack the freshness cooler and remo-
ve all packaging material after delivery.
Check whether the delivery is complete
and also pay attention to whether there
are any loose parts in or on the removed
packaging material.
Check whether the freshness
cooler or individual parts
show signs of damage. If this
is the case, do not use the
freshness cooler. Contact KMW customer
service immediately.
• The installation location of the coo-
ler should correspond to the envi-
ronment defined by climate class 3
(max. 25°/60% RH) and be well venti-
lated.
• The ventilation slots in the base must
be free and should not be covered or
blocked.
• When installing a freshness cooler in a
single or row installation, a minimum
distance of 50mm to all four boun-
dary surfaces such as walls, other
devices, shelves, etc. must be main
-
tained.
• The installation location should not be
exposed to excessive drafts or large
heat sources. This can impair the per-
formance of the freshness cooler.
•
In the case of block or row configura
-
tions, these must be ordered in ad
-
vance to match.
• Other installations and superstructures
should be avoided at the installation
site in order to prevent heat build-up.
•
Before using it for the first time, clean
all parts of the cooler as described in
the „Cleaning“ and „Maintenance“
chapters.
• Do not drive the freshness cooler over
steps.
• Never drill into the freshness cooler
and do not modify it in any other
way.
• Place the freshness cooler at the se-
lected location.
•
Align the cooler horizontally using the
four feet.
