3
Open the palette side bar.
4
Select the
kmcKMDtranslator
palette.
5
Drag the
KMC KMD Translator Service
to
Services
.
Within a few minutes the translation service will enable translation for the KMD-5551E
translators.
Discover the KMD devices
Once a translator is enabled from a licensed station, the KMD devices will be available for
discovery in Workbench.
1
Open the station.
2
Expand
Config
and then
Drivers
.
3
Double-click
BacnetNetwork
.
4
Click
Discover
.
5
In the
Configure Device Discovery
dialog, select one or more virtual networks
configured in KMD-5551E translators.
6
When discovery is complete, select the KMD devices in the
Discovered
list.
7
Click
Add
at the bottom of the page.
8
In the
Add
dialog, verify that
Type
is set to
Bacnet Device
.
9
Click
OK
. The KMD devices will be added to the BACnet Network under the station
drivers.
Adjust the tuning policy
Using a KMD-5551E translator requires adjusting the tuning policy of the BACnet network.
To set the tuning policy, do the following:
1
Open the station.
2
Expand
Config
,
Drivers
,
BacnetNetwork
, and then
Tuning Policies
.
3
Double-click
Default Policy
.
4
In the Property Sheet, verify or make the following changes:
l
Set
Write On Start
to
false
.
l
Set
Write On Up
to
false
.
l
Set
Write On Enabled
to
false
.
l
Set
Poll Frequency
to
Slow
.
Section 4: Setting up translation
KMC Controls, Inc.
50
Revision B
