KMC Controls HPO-9001, Installation Manual, Page: 5 / 5

HPO-9001 Distribution Module Installation Guide 5 923-019-02B
© 2018 KMC Controls, Inc. Specifications and design subject to change without notice 923-019-02B
IMPORTANT NOTICES
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice.
KMC Controls, Inc. makes no representations or
warranties with respect to this document. In no
event shall KMC Controls, Inc. be liable for any
damages, direct, or incidental, arising out of or
related to the use of this document.
The KMC logo is a registered trademark of KMC
Controls, Inc. All rights reserved.
TEL: 574.831.5250
FAX: 574.831.5252
EMAIL:
info@kmccontrols.com
ACCESSORIES AND REPLACEMENT PARTS
Miscellaneous Hardware
HCO-1101 Enclosure, plastic with
internal integrated Snap Track
and external DIN-rail or flat
surface mounting
HCO-103x Enclosures, steel, NEMA 1
HPO-9901 Conquest hardware
replacement parts kit (which
includes various controller
parts, but only the black
power terminal block is used
with the HPO-9001)
HSO-9001 Ethernet patch cable, 50 feet
HSO-9011 Ethernet patch cable, 50 feet,
plenum rated
HSO-9012 Ethernet patch cable, 75 feet,
plenum rated
Room Sensors
STE-9000 Series NetSensor digital room
temperature sensors with
optional humidity, occupancy,
and CO
2
sensing
STE-6010W10 Temperature sensor, analog,
white
STE-6014W10 Temperature sensor, analog,
with rotary setpoint dial, white
STE-6017W10 Temperature sensor, analog,
with rotary setpoint dial and
override button, white
NOTE: To order the STE-601x sensor with light
almond color instead of white, drop the
W on the end of the model number (e.g.,
STE-6010W is white and STE-6010 is
light almond).
Transformers, 120 to 24 VAC
XEE-6111-040 40 VA, single-hub
XEE-6112-040 40 VA, dual-hub