www.kluizen.nl
+ 31 (0) 180 555 200
Version 1.0
2.
Safety Instructions
Before you install the product
Make sure to apply proper grounding, using the plug. Short-circuit may cause electric shock. Allow
sufficient space from peripheral walls when placing the Product. Keep sufficient operation space for
filling of bills, opening and closing of covers, as well as maintenance.
When you operate the product
-
Do not insert banknotes severely damaged, wet or mixed with alien substances.
-
Please keep your hands away from Hopper or Stacker while counting.
-
Banknotes should be properly arranged, and then put on the hopper.
To maximize the durability of the product
-
Please have the check-up service by service personnel on regular basis.
-
Using soft brush or cloth, clean the sensor module parts (inside of the open cover on back side)
daily.
-
Do not place the product in a dusty space, making sure that the product stays free of dusts or alien
substances.
-
Keep and use the product under the optimal conditions as follows:
-
Temperature: 10-30
℃
(For use) Humidity: 20-80 %RH
NOTICE
-
Please place the product away from heat sources or direct sun rays.
-
Do not try to disassemble or repair the product by yourself.
-
Do not open or operate the product by force.
-
Make sure to shut its power off before putting your hands inside the product (for cleaning or
clearing note jamming only).
Page
3
of 11
