84
Revision 5.5
Deactivation while in active mode
Deactivation of the pilot laser in active mode is permissible only if the location of the laser
application is clearly indicated by the needle-shaped tip of the focusing handpiece.
•
Set MCO 25 plus to
LASER READY
.
•
Press the
PILOT
key twice within 3 s.
—
When pressed once, the yellow indicator lamp starts blinking.
—
Indicator lamp turns dark after pressing the
PILOT
key a second time within 3 s.
—
If the key is not pressed a second time within 3 s, the pilot laser remains activated.
•
If the key is pressed a second time within 3 s, the pilot laser is deactivated.
•
You can switch the pilot laser on again by pressing the key
LASER READY
.
6.12.3
Pilot Laser in Flashing Mode
In order to increase the visibility of the pilot laser, you can, if required, select the flashing
operating mode.
•
Press the
PILOT
key (S2) and hold it for more than 4 s.
—
The pilot laser now blinks with approx. 5 Hz
—
Higher visibility thanks to stronger contrast
To turn off the flashing (continuous operating mode), press the
PILOT
key (S2) and hold it for more than 4 s.
