Revision 5.5
61
6.6.4
Super Pulse Mode
In super pulse mode, the laser generates very short laser light pulses that have enhanced
intensity due to the physical process in the laser tube. This enables the user to work very
athermally thanks to the high maximum power output and concomitantly low pulse energy.
While the foot switch is activated, the laser generates a sequence of short light pulses in the
set intervals until the foot switch is released again. Only the pulse intervals and the pulse
frequency can be set on the display. Pulse width and output level are non-adjustable. In
addition, the average laser output is shown.
Parameters in super pulse mode
Setting range: Average laser power 0.3–11 W
The
SUPER PULSE
mode can be combined with the
CYCLE
mode. The cycle times are set as
in multiple pulse mode, see section 6.6.3 “Multiple Pulse Mode”, page 59.
Fig. 6-8:
Display of super pulse with cycle function
