48
Revision 5.5
The user can individually select the settings. It is, however, recommended to have a service
technician define the default settings upon initial commissioning of the device.
Time Setup
Time Setup
is the default setting when the device is delivered to the customer.
•
The pulse parameters are selected by entering the pulse duration and pause time.
Frequency Setup
•
The pulse parameters are selected by entering the pulse duration and pulse frequency.
6.4.1
Changing Modes
•
Simultaneously press the key
STANDBY
when switching on the device with the key switch.
—
The options
TIME SETUP
(time mode) and
FREQ SETUP
(frequency mode) appear on
the display
—
The asterisk marks the current selection
Fig. 6-1:
TIME SETUP (time mode) and FREQ SETUP (frequency mode)
•
Move the asterisk to the desired mode (Time Setup or Freq Setup) using the arrow keys.
•
Press
SELECT
to confirm your selection.
—
The display shows the starting screen and the software version of the MCO 25 plus.
Further control panel operations are described in section 6.5.2 “Control Keys and Display
Field”, page 54.
